Cruach Galvanized Réamhphéinteáilte
Tá sonraíochtaí coitianta gann!
cliceáil chun an bhileog sonraíochta a fháil!
PPGI & PPGL (Cruach Galbhánaithe Réamhphéinteáilte & Cruach Galvalume Réamhphéinteáilte), ar a dtugtar Cruach Réamh-bhrataithe nó Coil Cruach Brataithe le Dathanna freisin, is ionann iad agus barr nuálaíochta cruach. Déanta as leatháin chruaiche ghalbhánuithe te-tumtha, ghalbhánuithe te{-teo, agus leatháin chruaiche ghalbhánuithe leictrileictreach, déantar réamhchóireáil dhian dromchla ar na cornaí seo sula bhfaigheann siad sraith amháin nó sraitheanna iolracha de bhratú orgánach.
Tar éis iad a chur i bhfeidhm, déantar iad a bhácáil agus a dhaingniú go saineolach, agus bíonn táirge éadrom, taitneamhach ó thaobh na haeistéitice de, agus a bhfuil airíonna frith-chreimeadh den scoth ann.
Ar fáil i speictream dathanna lena n-áirítear liath, gorm farraige, agus dearg brící, tá na cornaí cruach seo fíor-riachtanach ar fud fógraíocht, tógáil, maisiú, fearais tí, fearais leictreacha, an tionscal troscáin, agus an earnáil iompair. Roghnaítear na bratuithe go cúramach bunaithe ar choinníollacha comhshaoil, ag baint úsáide as roisíní cosúil le poileistear, poileistear modhnaithe sileacain, plastisol clóiríd polaivinile, agus clóiríd polaiviniledéine.
Aimsítear feidhmchláir ilúsáideacha ar fud na tógála, na tionsclaíochta, na déantúsaíochta tí, pacáistiú táirgí, maisiú taobh istigh agus go leor réimsí eile.
-
Sonraíocht TDC51D+Z Corna Cruach Galbhánaithe
| Tiús pláta cruach fuar-rollta | Tiús leatháin chruach ghalbhánuithe | Pláta caitheamh+Pláta friotaíocht creimeadh | Corn galbhánaithe+Corna ghalbhánuithe | Ction toirt | Pláta cruach dhosmálta | Pláta tiubh |
| 0.1mm | 0.1mm | 1.5mm | 0.1mm | 0.1mm | 1.5mm | 18mm |
| 0.2mm | 0.2mm | 2.0mm | 0.2mm | 0.2mm | 2.0mm | 20mm |
| 0.3mm | 0.3mm | 2.5mm | 0.3mm | 0.3mm | 2.5mm | 22mm |
| 0.4mm | 0.4mm | 2.75mm | 0.4mm | 0.4mm | 2.75mm | 25mm |
| 0.5mm | 0.5mm | 3.0mm | 0.5mm | 0.5mm | 3.0mm | 28mm |
| 0.6mm | 0.6mm | 3.5mm | 0.6mm | 0.6mm | 3.5mm | 30mm |
| 0.7mm | 0.7mm | 3.75mm | 0.7mm | 0.7mm | 3.75mm | 32mm |
| 0.8mm | 0.8mm | 4.0mm | 0.8mm | 0.8mm | 4.0mm | 35mm |
| 0.9mm | 0.9mm | 4.5mm | 0.9mm | 0.9mm | 4.5mm | 40mm |
| 1.0mm | 1.0mm | 4.75mm | 1.0mm | 1.0mm | 4.75mm | 42mm |
| 1.2mm | 1.2mm | 5.0mm | 1.2mm | 1.2mm | 5.0mm | 45mm |
| 1.3mm | 1.3mm | 5.5mm | 1.3mm | 1.3mm | 5.5mm | 48mm |
| 1.4mm | 1.4mm | 5.75mm | 1.4mm | 1.4mm | 5.75mm | 50mm |
| 1.5mm | 1.5mm | 6.0mm | 1.5mm | 1.5mm | 6.0mm | 52mm |
| 1.6mm | 1.6mm | 6.5mm | 1.6mm | 1.6mm | 6.5mm | 55mm |
| 1.8mm | 1.8mm | 6.75mm | 1.8mm | 1.8mm | 6.75mm | 58mm |
| 1.9mm | 1.9mm | 7.5mm | 1.9mm | 1.9mm | 7.5mm | 60mm |
| 2.0mm | 2.0mm | 7.75mm | 2.0mm | 2.0mm | 7.75mm | 62mm |
| 2.1mm | 2.1mm | 8.0mm | 2.1mm | 2.1mm | 8.0mm | 65mm |
| 2.2mm | 2.2mm | 8.5mm | 2.2mm | 2.2mm | 8.5mm | 68mm |
| 2.4mm | 2.4mm | 8.75mm | 2.4mm | 2.4mm | 8.75mm | 70mm |
| 2.5mm | 2.5mm | 9.5mm | 2.5mm | 2.5mm | 9.5mm | 72mm |
| 2.6mm | 2.6mm | 9.75mm | 2.6mm | 2.6mm | 9.75mm | 75mm |
| 2.7mm | 2.7mm | 10mm | 2.7mm | 2.7mm | 10mm | 80mm |
| 2.8mm | 2.8mm | 10.5mm | 2.8mm | 2.8mm | 10.5mm | 82mm |
| 3.0mm | 3.0mm | 11.5mm | 3.0mm | 3.0mm | 11.5mm | 85mm |
| 3.2mm | 3.2mm | 11.75mm | 3.2mm | 3.2mm | 11.75mm | 90mm |
| 3.4mm | 3.4mm | 12mm | 3.4mm | 3.4mm | 12mm | 100mm |
| 3.5mm | 3.5mm | 12.5mm | 3.5mm | 3.5mm | 12.5mm | 110mm |
| 3.6mm | 3.6mm | 12.75mm | 3.6mm | 3.6mm | 12.75mm | 120mm |
| 3.8mm | 3.8mm | 13.75mm | 3.8mm | 3.8mm | 13.75mm | 140mm |
| 4.0mm | 4.0mm | 14mm | 4.0mm | 4.0mm | 14mm | 150mm |
| 4.2mm | 4.2mm | 14.5mm | 4.2mm | 4.2mm | 14.5mm | 160mm |
| 4.5mm | 4.5mm | 14.75mm | 4.5mm | 4.5mm | 14.75mm | 170mm |
| 4.6mm | 4.6mm | 15mm | 4.6mm | 4.6mm | 15mm | 180mm |
| 4.8mm | 4.8mm | 15.5mm | 4.8mm | 4.8mm | 15.5mm | 190mm |
| 5.0mm | 5.0mm | 16mm | 5.0mm | 5.0mm | 16mm | 200mm |
-
Liosta comhábhar As TDC51D+Z corna Cruach Galvanized
| Grád | C | Mn | Si | P | S | Cr | TI | Nb | V | |
| DX51D+AZ | Min. | / | / | / | / | / | / | / | ||
| uas. | 0.43% | 0.13% | 0.03% | 0.01% | 0.01% | / | / | |||
| DX53D+AS | Min. | / | / | / | / | / | 0.06% | / | ||
| uas. | 0.00% | 0.13% | 0 | 0.01% | 0.006 | / | / | |||
| DC01 | Min. | / | / | / | / | / | ||||
| uas. | 4.2 | 17 | 0.3 | 19 | 8 | / | / | |||
| SGCC | Min. | / | / | / | / | / | ||||
| uas. | 5 | 16 | 1 | 13 | 17 | / | / | |||
| Q235B | Min. | / | / | / | / | / | ||||
| uas. | 2 | 2 | 2 | 3 | 3 | / | / | |||
| Q345B | Min. | / | / | / | 2 | 2 | ||||
| uas. | 2 | 3 | 3 | 3 | 3 | 2 | 3 | |||
